006353064609515 [KYOCERA AVX]

Card Edge Connector, 64 Contact(s), 2 Row(s), Straight, 0.125 inch Pitch, Wire Wrap Terminal, Receptacle;


型号：	006353064609515
厂家：	KYOCERA AVX
描述：	Card Edge Connector, 64 Contact(s), 2 Row(s), Straight, 0.125 inch Pitch, Wire Wrap Terminal, Receptacle
文件：	总1页 (文件大小：111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

.125" x .250"

SERIES 6353

Compliant pin technology** VARIPIN™

.025" Square Post

Discrete Press-Fit

Compliant section: When the contact is

press-fit in, the section complies within the

hole. Stress is absorbed by the pin, not the

board, minimizing deformation of both the

hole and the plating.

**Licensed under U.S. patent RE 29513.

Assembly

Features

ٗ Pre-assembled contacts

ٗ Compliant press-fit interface (no

soldering required) VARIPIN™

ٗ Top-access installation too (see

page 13)

The connectors shown here are easily

installed using simple tooling (available from

ELCO) and an arbor press. If desired, ELCO

will install these connectors into the mother-

board to provide a complete backpanel.

ٗ Accepts .0625 ± .008 P.C. board

ٗ Adjacent connectors may be installed

on .500 inch centerlines

ٗ Standard insulator dimensions (see

6333 series)

ٗ Choice of insulator positions from 12 to

100 contacts (readily available: 16, 20,

28, 30, 44, 50, 56, 60, 62, 66, 70, 72, 80,

86 & 100)

Important: Building the hole accurately is

critical to proper press-fit joint perfor-

mance. The finished diameter of the hole is

a reference dimension. Tolerances for all

the factors in achieving that dimension

(drilled hole diameter, Cu plating thickness,

and solder plating thickness) must be

observed. Any deviation (e.g. a bigger hole

with thicker plating) may degrade the joint.

ELCO can provide engineering assistance

in specifying the “press-fit” holes.

ٗ Selective gold plating on mating surface

and either gold flash or tin lead tails

ٗ .025 inch square wrap post tails in four

lengths

NOTE: All dimensions and general speci-

fications for standard 6333 connectors

apply to the press-fit connector

Specifications

ELECTRICAL

Maximum contact resistance: Contact to

motherboard, 0.5 mΩ

Overall contact resistance: Daughter to

motherboard, 10 mΩ

Ordering Code

Typical Example

00 6353 080 606 505

MECHANICAL

Minimum retention force: Contact in

motherboard, 8 lbs.

Maximum installation force: Contact to

motherboard, 40 lbs.

Maximum torque: Contact in motherboard,

3 in-oz

SERIES

NUMBER OF CONTACTS

DUAL READ-OUT

Even Numbers Only

12 thru 100

MATERIALS

CONTACT CODE

606 Length “L” .205"

607 Length “L” .375"

608 Length “L” .550"

609 Length “L” .715"

Contact: Phosphor bronze

Thermoplastic insulator: UL94V0 glass-

filled polyester

MOTHERBOARD

Material: Glass-filled epoxy, FR-4 or G-10

Thickness: .093-.125 inch

Drilled hole diameter: .0453 ± .001 inch

Copper through-hole plating: .001-.003

inch

VARIATION CODE

PLATING DESCRIPTION

Mating

Area

Gold

Solder through-hole plating: .0003-.001

inch

Finished hole diameter: .040 ± .003 inch

Hole location tolerance:

Tail

Area

Flash

Gold

Flash

Gold

Tin/Lead

VARIATION CODE

505

MOUNTING

No mounting ears

515

615

605

.008 DIA.

Recommended for standard applications. Available through ELCO franchised distributors.

相关型号：